Description
1-1/2 In. Constant Swing Copper Tubing Cutter
Have the Milwaukee® 1-1/2-Inch Constant Swing Copper Tubing Cutter on hand to cut copper tubing to length with sharpness and precision. The aluminum open-face, screw-drive swing cutter can handle copper tubing between 1/8 and 1-5/8 inches in diameter. This tubing cutter makes swings cuts with just finger pressure, turning on four jaw rollers that are chrome plated for rust resistance. The cutting blade is machine-edged for a sharp insertion point and then screw-bracketed to the cutter to eliminate wobble. The Milwaukee straighter-cut tubing cutter has an oversized finger-notched thumb screw that provides balanced adjustment pressure to keep the blade on track. It also keeps you from over-tightening the cutting wheel and leaving behind jagged uneven edges. An integrated reamer flips out from the spine of the cutter for deburring cut tubing.
Features
Milwaukee 1-1/2-inch constant-swing copper tubing cutter is an open-face, screw-drive cutter that cuts copper pipe up to 1-5/8 inches
Swing cutter has four chrome-plated rollers for smooth rolling action
Cutting blade of the Milwaukee straighter-cut tubing cutter has a machined-sharpened edge for ultra-clean cuts
Cutting blade is screwed into a wheel bracket that keeps the blade on track through cuts
Adjustment screw provides even tightening pressure for straighter cuts
Cutter has an onboard reamer
Swing cutter comes with a limited lifetime warranty